樹脂砂混砂機

特點　Characteristic：

● 根據不同工藝要求精心選擇的液料溫控裝置、過濾器、計量泵、閥，確保流量穩定可靠。According to the different process requirements carefully selected liquid temperature control devices,filters,metering pumps,valves to ensure stabel and reliable flow.

● 液料系統設計有防回流功能，可避免液料回流對供料精度的影響。

The design of liquid material system has the function of anti backflow, which can avoid the effect of liquid backflow on the feeding accuracy.

● 大臂下砂口設有除塵口，可進一步去除揮發的氣味。

The lower arm of the big arm is equipped with a dust removal port, which can further remove the dust in the sand.

● 停機后機內型砂全部排空，避免型砂硬化后造成清理困難。

After the shutdown, all the molding sａnd inside the machine is emptied to avoid the difficulty of cleaning after molding sａnd hardening.

● 主軸轉速設定為中速、攪籠長度較長、雙螺旋攪刀布置，使混砂更為均勻。

The spindle speed is set at medium speed, the cage length is longer, and the double helix cutter is arranged to make the sａnd blending more uniform.

● 攪刀鑲有硬質合金刀頭，的定位結構，可保證角度裝配準確，調節刀頭長度時角度不變。

The stirring knife is inlaid with carbide cutter head.The unique positioning structure ensures that the angle assembly is accurate and the angle remains unchanged when the length of the knife head is adjusted.

● 攪籠內襯采用耐磨材料制作，延長了使用壽命，攪籠采用水平對開式結構，便于鉸刀清理或調整，操作維修方便。

The inner lining of the stirring cage is made of wear-resistant material,which prolongs the service life of the stirring cage.The horizontal opening structure of the stirring cage is adopted to facilitate the cleaning or adjustment of the cutter, and the operation and maintenance are convenient.

● 特殊的粘結劑加料系統和型砂出料口設計，配以精確的控制，混砂機啟動、停止過程中可實現基本無頭尾砂損失。

Special binder feeding system and mold sａnd outlet design,coupled with accurate control,mixer start-up and stop process can achieve basically no tailings loss.

● 混砂機進口處可根據生產需要配置新舊砂比例調節器，準確控制新舊砂的出砂量比例，混砂過程可按預先調好的比例進行選擇和改變。

The sａnd mixer inlet can be equipped with new and old sａnd proportion regulator according to production needs, and the sａnd production ratio of new and old sａnd can be accurately controlled.

● 各砂料轉卸口和型砂出料口都有抽風管接至除塵器，改善了作業環境。

The sａnd mixing process can be selected and changed according to the pre-adjusted proportion.

● 電氣采用PLC控制，模擬顯示，工作穩定可靠，實現自動化生產。

Each sａnd discharge port and the sａnd discharge outlet have air exhausting pipes connected to the dust collector to improve the working environment.

● 大臂和混砂攪籠回轉方式根據要求，有手動、機動兩種回轉方式，機動方式可實現遙控。

The electrical control is simulated by PLC.The simulation shows that the system works stably and reliably, and realizes automatic production.

● 移動式混砂機，可根據用戶需要設計超長大臂，滿足大型鑄件生產的要求。

According to the requirement, there are two kinds of rotary modes, manual and , which can realize remote control.

● 移動混砂機臺車啟動、停止過程平穩，并設有安全防撞裝置。

The sａnd mixer can design super long arms according to the needs of users to meet the requirements of large castings production.

咨詢熱線：0512-66077220    https://www.www.xkblc.cn